Flents Ezy-Drop Guide And Eyewash Cup

Dosage

Wash the Guide thoroughly with soap and warm water before use. Rinse well and dry. Remove the screw cap from the medicine bottle, remove guide plug from the eye wash cup, then thread the Ezy-Drop Guide on to the top of the bottle until snug. Use the attached cap to cover the bottle tip when not in use. To prevent contamination, do not allow fingers to touch the tip of the eye drop bottle. 1. Attach the Ezy-Drop Guide to eyedrop bottle. 2. Place the Ezy-Drop Guide gently over the eye. Be sure that the dropper tip does not extend more than 1/4 inch through the guide hole. The tip of the eye drop bottle should not touch the eyeball. 3. With eye wide open, tilt head back to a horizontal position. Squeeze bottle gently to allow prescribed drops into the eye.

Warning

To use the Ezy-Drop Guide on another eye drop bottle, be sure to wash the Guide thoroughly with soap and warm water, then thoroughly rinse the entire Guide. Use the attached cap on the Guide to replace screw cap on the eye drop bottle.