Bausch And Lomb Advanced Eye Relief Wash

Ingredients

Active Ingredients: Purified Water 99.05%. InActive Ingredients: Boric Acid; Sodium Borate; Sodium Chloride; Hydrochloric Acid and/or Sodium Hydroxide; Edetate Disodium 0.025%; Sorbic Acid 0.1%

Dosage

For use with nozzle applicator: Flush the affected eye(s) as needed. Control the rate of flow of solution by pressure on the bottle. When using an eye cup: Rinse the cup with product immediately before each use. Avoid contamination of the rim and inside surfaces of the cup. Fill the cup half full with solution and apply the cup to the affected eye(s), pressing tightly to prevent spillage. Tilt the head backward. Open eyelids wide and rotate eyeball to thoroughly wash the eye. Rinse cup with clean water after each use. Replace cap after use. Store at 15-25 degrees C (59-77 degrees F). Keep tightly closed.

Warning

Do not use: If you have open wounds in or near the eyes, and get medical help right away If solution changes color or becomes cloudy. When using this product: Remove contact lenses before using. Do not touch tip of container to any surface to avoid contamination. Replace cap after use. Stop use and ask a doctor if: You experience eye pain, changes in vision, continued redness or irritation of the eye. Condition worsens or persists. Keep out of reach of children. If swallowed, get medical help or contact a Poison Control Center right away. FOR USE IN THE EYES ONLY.